1. What is a Ghost Immobiliser?

A Ghost Immobiliser is a covert CAN bus security system that prevents your vehicle from starting without a unique PIN entered via factory controls.

2. How does the Autowatch Ghost II work?

It integrates with your vehicle’s CAN bus system and requires a secret button sequence before the engine will start, blocking unauthorised access.

3. Is Ghost Immobiliser effective against keyless car theft?

Yes. It protects against relay attacks, key cloning, and OBD hacking because the vehicle cannot start without the hidden PIN code.

4. Can thieves detect the Ghost Immobiliser?

No. It is completely invisible with no LEDs, wiring traces, or RF signals, making it extremely difficult for thieves to identify.

5. Does it affect my car warranty?

In most cases, no. The system is non-invasive and does not cut factory wiring, but you should still confirm with your manufacturer.

6. What vehicles can be fitted with a Ghost Immobiliser?

Most CAN bus vehicles made after 2004, including Land Rover, BMW, Mercedes, Audi, Ford, Toyota, VW, and many commercial vans.

7. Does it work with keyless entry cars?

Yes. It is designed specifically to protect modern keyless entry vehicles from relay and signal-based theft methods.

8. Can I still take my car for servicing or valet?

Yes. The service mode allows temporary deactivation so your vehicle can be used without exposing your PIN.

9. Where is Ripon installation available?

Installation is available locally through OJB Autocare and surrounding North Yorkshire areas.

10. Does Ghost Immobiliser affect insurance?

Many insurers recognise it as a high-level security upgrade and may offer reduced premiums or require it for high-risk vehicles.

Ghost

Immobiliser

Installation

Ripon

Vehicle theft in North Yorkshire is no longer just a city problem. Rural and market towns like Ripon are seeing a steady rise in keyless car theft, relay attacks, and organised vehicle crime. If you own a modern car, van, or 4x4, your factory-fitted alarm is very unlikely to stop a determined thief. At OJB Autocare, we install the Autowatch Ghost II immobiliser — the gold standard in covert vehicle protection — right here in Ripon and across the surrounding area.

Ghost

Immobiliser

services in Ripon

The core service. Professional fitting of the Autowatch Ghost II immobiliser to any compatible vehicle. Includes full system calibration, PIN sequence programming, and Autowatch portal registration. Suitable for cars, vans, 4x4s, and prestige vehicles.
When a vehicle fitted with a Ghost is bought or sold, the system must be transferred to the new owner. OJB Autocare handles the full Autowatch portal transfer, PIN reset, and new owner handover — ensuring the new keeper has complete control of the system.
Circumstances change — a shared driver leaves, you feel your code has been compromised, or you simply want a fresh sequence. OJB Autocare reprograms your Ghost PIN quickly and securely, with a full walk-through of your new sequence before you leave.
If your Ghost is showing unexpected behaviour — failing to recognise your PIN, preventing normal starting, or triggering without cause — OJB Autocare carries out full CAN bus diagnostic testing to identify the fault and restore correct operation.
Before taking your vehicle to a dealership, garage, or valet, service mode must be correctly enabled. OJB Autocare configures and verifies your service mode settings, and trains you on how to activate and deactivate it safely and confidently.
Learn More: Ghost Immobiliser Installation Selby

Vehicles We

Protect at OJB

Autocare

The Ghost Immobiliser is compatible with most modern CAN bus vehicles, covering nearly all cars, vans, and SUVs manufactured after 2004. We regularly install it on models such as Land Rover Defender, Discovery, Range Rover Sport and Velar, Toyota Land Cruiser and Hilux, Ford Ranger and Transit, BMW 3 Series, 5 Series and X5, Mercedes-Benz C-Class, E-Class and GLE, Volkswagen Golf, Tiguan and Transporter, Audi A3, A4, A6 and Q Series, Porsche Cayenne and Macan, Jaguar F-Pace and XF, Isuzu D-Max, Mitsubishi L200, and many more. It is especially recommended for high-risk vehicles such as keyless entry 4x4s, luxury saloons, and commercial vans where theft risk is significantly higher.

How the Autowatch Ghost II

Works — A Closer Look

The Autowatch Ghost II works by integrating directly with your vehicle’s CAN bus network, which links key electronic control units like the engine, body, and transmission systems. It adds an invisible layer of authentication that only responds to your unique button sequence, allowing the vehicle to start only when the correct input is detected. This makes modern relay attacks ineffective, as the key fob is no longer used to authorise ignition — instead, your hidden PIN code is required. For convenience, a service mode can be activated when handing the vehicle to a mechanic or valet, temporarily disabling PIN entry for a single journey before automatically reactivating afterward. If the PIN is forgotten, an emergency override code—set during installation and stored securely—can restore access safely.

Ghost Immobiliser vs Other

Vehicle Security Options in

Ripon

There are many vehicle security options available, but they vary greatly in effectiveness. Steering wheel locks are visible deterrents that can be quickly bypassed, while factory OEM alarms offer limited protection against modern theft methods like relay attacks and key cloning. GPS trackers help recover stolen vehicles but do not prevent theft, and traditional aftermarket immobilisers can often be identified and bypassed by experienced thieves. In contrast, the Autowatch Ghost II uses a hidden CAN bus system that is silent, undetectable, and highly secure, making it effective against relay attacks, OBD hacking, key cloning, and hot-wiring, and is widely regarded as one of the most advanced vehicle security solutions in the UK.

Serving Ripon

and the

Surrounding

North Yorkshire

Area

OJB Autocare is based in the Ripon area and regularly serves customers from:

Ripon itself, including HG4 postcodes — Harrogate and the HG1, HG2, HG3 corridor — Thirsk and Northallerton to the north — Boroughbridge and Knaresborough to the south — Masham, Bedale, and the Dales villages to the west — Easingwold and York to the southeast.

If you're not sure whether we cover your area, just give us a call. We're flexible and we're local.

Frequently Asked Questions

A Ghost Immobiliser is a covert CAN bus security system that prevents your vehicle from starting without a unique PIN entered via factory controls.
It integrates with your vehicle’s CAN bus system and requires a secret button sequence before the engine will start, blocking unauthorised access.
Yes. It protects against relay attacks, key cloning, and OBD hacking because the vehicle cannot start without the hidden PIN code.
No. It is completely invisible with no LEDs, wiring traces, or RF signals, making it extremely difficult for thieves to identify.
In most cases, no. The system is non-invasive and does not cut factory wiring, but you should still confirm with your manufacturer.

Most CAN bus vehicles made after 2004, including Land Rover, BMW, Mercedes, Audi, Ford, Toyota, VW, and many commercial vans.
Yes. It is designed specifically to protect modern keyless entry vehicles from relay and signal-based theft methods.
Yes. The service mode allows temporary deactivation so your vehicle can be used without exposing your PIN.
Installation is available locally through OJB Autocare and surrounding North Yorkshire areas.
Many insurers recognise it as a high-level security upgrade and may offer reduced premiums or require it for high-risk vehicles.

Contact us.

For more information about all our vehicle security products and services, drop us an email using this form, or send us a WhatsApp message. Thanks, OJB.